Ultimate Guide to the D-VXR-OE-23 - Latest Jun 14, 2024 Edition Available Now
2024 Updated Verified Pass D-VXR-OE-23 Exam - Real Questions and Answers
NEW QUESTION # 73
When does vSAN deduplication occur in a VxRail cluster?
- A. During writes from the host to the cache tier
- B. During destage from the capacity tier to the cache tier
- C. During destage from the cache tier to the capacity tier
- D. During writes from the host to the capacity tier
Answer: C
NEW QUESTION # 74
A VxRail administrator wants to search for VxRail related knowledge base articles through the VxRail Manager user interface.
Which action must the administrator perform to use this feature?
- A. Register for a VxRail Community login and set the credentials in VxRail Manager
- B. Configure proxy settings in VxRail Manager for access to the Internet
- C. Work with Dell EMC to register the VxRail appliance in the install Database
- D. Set the Dell EMC Support username and password in VxRail Manager
Answer: D
NEW QUESTION # 75
A company has bought VxRail V Series appliances with PCle network cards.
How can the PCle NIC ports be configured in VxRail for data traffic?
- A. During initial VxRail setup the NIC ports would be configured automatically to carry VM network traffic
- B. Create new Standard or DV switch and add these NICs as uplinks to carry VM network traffic
- C. During initial VxRail setup the NIC ports would be configured automatically to carry both vMotion and VM network traffic
- D. Create new Standard or DV switch and add these NICs as uplinks to carry both vMotion and VM network traffic
Answer: B
NEW QUESTION # 76
Which path should be followed to determine how much vSAN capacity is available?
- A. Cluster > Monitor > vSAN > Capacity
- B. Cluster > Configure > vSAN > Disk Management
- C. Cluster > Monitor > vSAN > Skyline Health
- D. Cluster > Monitor > vSAN > Physical Disks
Answer: A
NEW QUESTION # 77
What is the fault tolerance method provided by the default storage policy on a newly deployed VxRail all-flash cluster?
- A. RAID-1/10
- B. RAID-1
- C. RAID-5
- D. RAID-6
Answer: B
NEW QUESTION # 78
A VxRail administrator wants to determine how long the rebuild will take after experiencing a disk failure in the vSAN Cluster.
Where is this information located in the vSphere Client?
- A. Monitor > vSAN > Data Migration Pre-Check
- B. Configure > vSAN > Services > Object repair timer
- C. Configure > vSAN > Disk Management
- D. Monitor > vSAN > Resyncing Objects
Answer: D
NEW QUESTION # 79
What are all the actions that can be performed from the Node Information panel of the Physical View of a VxRail E series node?
- A. Replace Disk
Shutdown Host - B. Add Disk
Shutdown Host
Enable Chassis LED - C. Replace Disk
Shutdown Host
Enable Chassis LED - D. Add Disk
Enable Disk LEDs
Answer: B
NEW QUESTION # 80
What is the minimum recommended number of hosts in a vSAN cluster for FTT = 2 and FTM = Erasure Coding?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 81
What is the minimum number of nodes required to build a VxRail 4.5 cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 82
Which VDS port group load balancing option requires Static LAG EtherChannel configuration?
- A. Route based on physical NIC load
- B. Route based on source MAC hash
- C. Route based on originating virtual port
- D. Route based on IP hash
Answer: D
NEW QUESTION # 83
A VxRail administrator observes alarms that start with VXR... in the vSphere client.
How should the administrator find detailed information about the alarms and related knowledge-base articles?
- A. Refer to the VxRail Event Code Reference
- B. Click the Ask Dell EMC link in the Triggered Alarms page
- C. Click the KB link in the Alarm Definitions page
- D. Refer to the VxRail Administration Guide
Answer: A
NEW QUESTION # 84
Which path should be followed to check disk level vSAN metrics?
- A. Cluster > Configure > vSAN > Disk Management
- B. Cluster > Monitor > Host > vSAN > Performance > Disks
- C. Host > Monitor > vSAN > Performance > Disks
- D. Host > Monitor > Performance > Overview
Answer: C
NEW QUESTION # 85
The VxRail administrator has been given the task of migrating the current production environment to a VxRail cluster with external block storage. The VMs must remain online during the migration.
Which VMware feature can be used?
- A. VMware Converter Software
- B. vMotion
- C. Storage vMotion
- D. High Availability
Answer: C
NEW QUESTION # 86
After a successful code upgrade of a VxRail Cluster, the administrator views the installed components in the vSphere client to validate the code levels.
Which component will be listed?
- A. iDRAC
- B. BOSS Firmware
- C. ESXi
- D. Secure Remote Services
Answer: C
NEW QUESTION # 87
A VxRail administrator is concerned that the NDC is a single point of failure on your VxRail nodes.
What can be done to increase redundancy in this scenario?
- A. Spread network traffic across two ports on a PCIe adapter
- B. Spread network traffic across two NDC
- C. Spread network traffic across other nodes in the cluster
- D. Spread network traffic across NDC and PCIe adapter ports
Answer: D
NEW QUESTION # 88
A VxRail has been configured with the VxRail-deployed vCenter Server option.
Which service VMs can be optionally hosted on the VxRail cluster?
- A. vCenter Server, Platform Services Controller, and Secure Remote Services/VE
- B. vRealize Log Insight and Secure Remote Services/VE
- C. VxRail Manager and Secure Remote Services/VE
- D. VxRail Manager, vCenter Server, and Platform Services Controller
Answer: B
NEW QUESTION # 89
What must be run to ensure all components are healthy before upgrading a VxRail Cluster?
- A. vSAN Proactive Tests
- B. VxVerify
- C. Performance Diagnostics
- D. Skyline Health
Answer: B
NEW QUESTION # 90
An administrator is trying to monitor the health of the VxRail vSAN cluster.
Which tool should be used to check hardware compatibility, network configuration and operation, storage device health, virtual machine objects, and advanced vSAN configuration options?
- A. VxRail Manager
- B. Online Health
- C. Proactive Tests
- D. Skyline Health
Answer: D
NEW QUESTION # 91
Using the VxRail Plugin, what does VxRail administrator use to compare the current component version state against the expected component version state?
- A. Health Monitoring
- B. Skyline Reports
- C. Compliance Reports
- D. VxRail VxVerify
Answer: C
NEW QUESTION # 92
A VxRail administrator observes alarms that start with VXR in the vSphere client.
How can they obtain information about the alarms and the related knowledge base articles?
- A. Consult the General VMware Knowledge Base.
- B. Go to the Alarm Definitions page and click the KB link.
- C. Use the VxRail Administration Guide.
- D. Use the VxRail Event Code Reference.
Answer: D
NEW QUESTION # 93
......
Dumps Moneyack Guarantee - D-VXR-OE-23 Dumps Approved Dumps: https://pass4sure.testpdf.com/D-VXR-OE-23-practice-test.html
