Go to C_IBP_2108 Questions - Try C_IBP_2108 dumps pdf
Dumps Practice Exam Questions Study Guide for the C_IBP_2108 Exam
NEW QUESTION 48
You are modeling the introduction of a new product using Lifecycle Planning functionality in SAP IBP.
What is mandatory to create in your planning area for the setup of reference product(s) to work? Note:
There are 2 correct Answers to this question.
- A. Planning objects for the new product
- B. Definition of an attribute representing the product ID
- C. Definition of an attribute representing the product description
- D. Definition of Actual Sales business meaning for one key figure
Answer: A,B
NEW QUESTION 49
What does ABC/XYZ segmentation allow you to do? Note: There are 2 correct Answers to this question.
- A. Identify inventory items that require closer attention.
- B. Assign more appropriate inventory algorithms to planning objects.
- C. Analyze forecast accuracy by product class.
- D. Tailor your forecast strategy and inventory optimization to segment characteristics.
Answer: C,D
NEW QUESTION 50
Which of the following is one of the functions of multi-echelon inventory optimization?
- A. Ability to maintain high external service levels with high internal service levels
- B. Ability to maintain high external service levels with low internal service levels
- C. Ability to optimize delivery costs between different locations
- D. Ability to optimize lead times between different locations
Answer: B
NEW QUESTION 51
You are configuring disaggregation for the KF1 key figure. Which methods can you apply? Note: There are 3 correct Answers to this question.
- A. An internal system-generated disaggregation
- B. Disaggregation in batch triggered by an application job
- C. Disaggregation according to an equal split
- D. Disaggregation according to a user-defined expression
- E. Proportional disaggregation by using KF2 in the expression
Answer: C,D,E
NEW QUESTION 52
Which SAP IBP planning operator can be run to delete planning objects in a certain version?
- A. Purge Master Data
- B. Purge Key Figure Data Outside Planning Area Planning Horizon
- C. Purge Key Figure Data
- D. Purge Non-Confirming Data
Answer: C
NEW QUESTION 53
You create an S&OP operator for heuristics on an SAP IBP project. What must you enable for the S&OP operator that is specifically relevant for subnetworks?
- A. Supply propagation
- B. Balance Receipts parameter
- C. Compute Expected Supply parameter
- D. Normalize Quotas parameter
Answer: C
NEW QUESTION 54
Which of these conditions must be met to create a Local Member key figure?
- A. A key figure is created in the Planning Area app.
- B. A key figure is selected in the Key Figures tab in the Microsoft Excel add-in.
- C. Use Excel Cell References in Report Editor is selected.
- D. Activate Local Member Recognition is selected.
Answer: D
NEW QUESTION 55
What options for copying will be available to you? Note: There are 2 correct Answers to this question.
- A. Creation of a partial copy with a new ID along with the time profile and required master data types
- B. Creation of an exact copy with a new ID along with the time profile and master data types
- C. Creation of a partial copy with a new ID along with the time profile and all master data objects
- D. Creation of an exact copy with a new ID, with the time profile and master data types shared with the source
Answer: A,C
NEW QUESTION 56
Which of the following stages can be modeled using scenarios from the S&OP planning cycle? Note:
There are 2 correct Answers to this question.
- A. Data input review for inventory
- B. Demand-supply balancing
- C. Demand sensing stage
- D. Demand review
Answer: B,D
NEW QUESTION 57
Which are the mandatory preconditions for an attribute that can be used for saving the segmentation results? Note: There are 2 correct Answers to this question.
- A. It belongs to a simple or compound master data type.
- B. It should be a non-key attribute of the master data type.
- C. Its data type is INTEGER and its length has been specified.
- D. The length of the attribute needs to be 18 digits.
Answer: A,B
NEW QUESTION 58
Time profiles are made out of levels, which are in turn made out of periods. What are the ways SAP IBP identifies profiles and periods?
- A. Periods are identified by an alphanumeric prefix and profiles by an integer.
- B. Both periods and profiles are identified by an integer.
- C. Periods are identified by an integer and profiles by an alphanumeric prefix.
- D. Periods are identified by a start and end date and profiles by an integer.
Answer: D
NEW QUESTION 59
Which of the following solutions are feasible when using the time series supply optimizer? Note: There are 3 correct Answers to this question.
- A. Not-fully satisfied demands
- B. Violation of minimum resource utilization
- C. Violation of minimum aggregated inventory values
- D. Not respecting production capacity
- E. Not adhering to maximum transport values
Answer: A,B,C
NEW QUESTION 60
Model configuration allows the attributes of a master data type to be assigned as key figures. Which features are relevant for this type of object?
- A. This object contains user-defined criteria that monitor execution of business plans.
- B. This type of key figure is not usually stored and it cannot be set to editable.
- C. This object is not exposed to the user in planning views or modeling.
- D. This object provides a single value for a unique planning combination.
Answer: D
NEW QUESTION 61
How can you make charts and dashboards private?
- A. Enable the relevant settings in the Analytics Advanced and Dashboards Advanced applications.
- B. Choose only relevant key figures and filters in the Analytics Advanced application.
- C. Set restrictions for charts in the Permission filter application.
- D. Enable the relevant settings in the global configuration parameters.
Answer: D
NEW QUESTION 62
You are using the Resource Location master data type. How do you specify capacity supply as time- dependent?
- A. Maintain the CAPASUPPLY key figure values in the planning area.
- B. Set the Capacity Supply Time Series indicator in the Resource Location master data type.
- C. Set the Capacity Supply Time Series indicator attribute as a key.
- D. Set the Capacity Supply additional attribute in the time profile.
Answer: B
NEW QUESTION 63
You are modeling a substitution scenario associated with a promotion. What are some of the Master Data parameters that you need to maintain to ensure desired results generated by the optimizer? Note:
There are 2 correct Answers to this question.
- A. Location Product Sub Cost Rate
- B. Loc-Prod Subst Valid-From Date
- C. Promotion duration
- D. Flag 'Disable Substitution of Location Products'
Answer: B,C
NEW QUESTION 64
While modeling costs for optimization, you are conscious of the necessity to respect inventory targets and meet demands in the short term. Which of the following are valid relationships between costs you must adhere to? Note: There are 2 correct Answers to this question.
- A. Target inventory violation cost should be less than max inventory violation cost.
- B. Target inventory violation cost should be greater than discount for demand lateness.
- C. Target inventory violation cost should be greater than inventory holding cost rate.
- D. Target inventory violation cost should be less than transportation cost rate.
Answer: C,D
NEW QUESTION 65
Where can we see the results of Time Series analysis in SAP IBP?
- A. Time Series Property Attribute in Customer
- B. Time Series Property Attribute in Customer Source
- C. Time Series Property Attribute in Customer Product
- D. Time Series Property Attribute in Product
Answer: D
NEW QUESTION 66
Which supply chain challenge is addressed by SAP IBP for demand?
- A. Inability to understand and shape actual demand
- B. Inability to arrive at consensus demand
- C. Inability to respond to short-term changes in supply and demand
- D. Inability to synchronize supply and demand
Answer: A
NEW QUESTION 67
Which of the following can be used as inputs for inventory level optimization? Note: There are 2 correct Answers to this question.
- A. Lead time variability
- B. Lot sizes
- C. Reorder point
- D. Target inventory level
Answer: A,B
NEW QUESTION 68
You need to create time periods for the time profile in a planning area. What should you be aware of when executing the Create Time Periods application job?
- A. The planning area with this time profile must be activated so that the application job can proceed.
- B. This application job cannot be scheduled for immediate start.
- C. This application job can be run for multiple time profiles at once.
- D. A time profile has to be activated so that the application job can proceed.
Answer: A
NEW QUESTION 69
Which header name displays are available in the Report Options menu of the SAP IBP Excel interface?
Note: There are 2 correct Answers to this question.
- A. Business meaning, as defined in configuration
- B. Full unique name including the dimension and technical name
- C. Caption, as defined in configuration for the default name
- D. Changed member names that the user had created
Answer: A,B
NEW QUESTION 70
......
SAP C_IBP_2108 Exam Description:
The "SAP Certified Application Associate - SAP IBP for Supply Chain (2108)" certification exam verifies that the candidate possesses the basic knowledge in the area of the SAP supply chain planning. This certificate proves that the candidate has a basic overall understanding within this consultant profile of the industry solutions, and can implement this knowledge practically in projects under guidance of an experienced consultant. It is recommended as an entry-level qualification to allow consultants to get acquainted with the fundamentals of SAP Integrated Business Planning. Please note that this 2105 version of the exam takes part in the Stay Current with SAP Global Certification program. Once you pass this version of the exam, make sure that you start your stay current process. You will be required to take the quarterly stay current assessment for all subsequent SAP IBP releases via the SAP Learning Hub starting with the 2108 release to maintain your SAP IBP consultant certification status and badge. In order to participate in the stay current program and access the stay current enablement and assessment, you will need at minimum an SAP Learning Hub, edition for IoT and Digital Supply Chain subscription. (https://training.sap.com/learninghub)
C_IBP_2108 Exam Certification Details:
| Sample Questions: | SAP C_IBP_2108 Exam Sample Question |
| Level: | Associate |
| Duration: | 180 mins |
| Cut Score: | 64% |
Free SAP Certified Application Associate C_IBP_2108 Exam Question: https://pass4sure.testpdf.com/C_IBP_2108-practice-test.html
