Aug-2023 Realistic 156-835 Exam Dumps with Accurate & Updated Questions
156-835 Exam Dumps - PDF Questions and Testing Engine
The CheckPoint 156-835 exam measures a candidate’s ability to design, deploy, manage, and troubleshoot Check Point Maestro, which is a network management solution that allows organizations to scale their security management systems. 156-835 exam also covers topics such as network virtualization, automation, and orchestration, as well as advanced security concepts such as threat prevention, cloud security, and mobile security.
What is the salary of a Check Point Certified Maestro Expert Specialist
The table below shows the average annual salaries for a variety of professions in the United States, United Kingdom, and India.
India: INR 6314071 per year
United States: USD 81,000 per year
United Kingdom: Pounds 66254 per year
The CheckPoint 156-835 exam consists of 90 multiple-choice questions and is available in English. Candidates have 90 minutes to complete the exam, and a passing score of 70% or higher is required to earn the certification. 156-835 exam covers a variety of topics, including Check Point Maestro architecture, deployment, management, and troubleshooting.
NEW QUESTION # 20
What command will be used for updating fwkern.conf file on all Appliances within Security Group?
- A. g_all update_conf_file
- B. vi
- C. g_update_conf_file
- D. g_update_kernel
Answer: A
NEW QUESTION # 21
What is the Iterator process?
- A. Iterator is the process that follow Appliance recovery and simulates what was a distribution if recovered Appliance was alive
- B. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance failure
- C. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance recovery
- D. Iterator is the process that simulates distribution in case of Appliance failure
Answer: A
Explanation:
Iterator is the process that follows Appliance recovery and simulates what was a distribution if recovered Appliance was alive. The Iterator process runs on the Security Management Server and simulates the distribution of the Security Gateways if the recovered Appliance was alive. This helps ensure that the network remains secure and the traffic flow is optimized.
NEW QUESTION # 22
What is the default range of physical ports for downlinks on Orchestrator MHO-170?
- A. 1 - 16
- B. 17 - 31
- C. 3 - 16
- D. 25 - 32
Answer: B
NEW QUESTION # 23
What cannot be learned from the output of asg perf -v -p command?
- A. Per-path distribution
- B. Average CPU usage on Appliances
- C. Real-time throughput
- D. Average CPU usage on Orchestrators
Answer: D
NEW QUESTION # 24
What command should be used for collecting diagnostic information about the orchestrator?
- A. cpinfo
- B. asg pert -v
- C. orch_info
- D. cpview
Answer: C
NEW QUESTION # 25
There are two 10Gbps dual-port NIC installed on a 6800 appliance. Which interfaces should be connected to Orchestrator 1 for downlinks' intra-orchestrator redundancy when using two Orchestrators?
- A. Port 1 in Slot 2 and Port 2 in Slot 1
- B. Any pair of available ports
- C. Port 1 in Slot 1 and Port 2 in Slot 1
- D. Port 1 in Slot 1 and Port 1 in Slot 2
Answer: D
NEW QUESTION # 26
What does the lldpctl command do?
- A. Show all devices discovered by LLDP protocol on all ports
- B. Show all devices discovered by LLDP protocol on uplink ports
- C. Show all devices discovered by LLDP protocol on downlink ports
- D. Discover orchestrators
Answer: A
NEW QUESTION # 27
Which is a valid requirement for a supported Maestro appliance?
- A. Nothing special as Maestro supports any Check Point appliance
- B. At least one 10GBps line card
- C. 10GBps and 40Gbps or 100Gbps card with double-VLAN and LLDP support
- D. Line card with double-VLAN and LLDP support
Answer: C
NEW QUESTION # 28
How many orchestrators may Dual-Site include''
- A. Only 4
- B. 0
- C. 2 or 4
- D. 1
Answer: C
NEW QUESTION # 29
Which setting is required in order to connect an appliance with 40Gbps downlink interface and DAC to the Orchestrator MHO-140?
- A. No change required
- B. On Orchestrator: Change QSFP mode from 100Gbps to 40Gbps
- C. On Appliance: Change a port speed to 10Gbps
- D. On Orchestrator: Change port type from uplink to downlink
Answer: D
NEW QUESTION # 30
There are two appliances within the same Security Group. One of them is connected by One downlink only, another one by Two downlinks. Assuming there's no NAT and no VPN, what would be proportion of traffic distribution done by Orchestrator?
- A. 33%/66%
- B. 50%/50%
- C. 66%/33%
- D. 100%/0%
Answer: B
NEW QUESTION # 31
What kinds of transceivers are supported on Orchestrator MHO-170?
- A. SFP+, SFP28. QSFP
- B. QSFP. QSFP28
- C. SFP. SFP+. SFP28
- D. SFP. QSFP, QSFP28
Answer: B
NEW QUESTION # 32
What is the default IP range of CIN network (with no increment)?
- A. 192. 0 .2 .0
- B. The same as Management network
- C. 192.168.1.0
- D. 198 .51 .100. 0
Answer: D
NEW QUESTION # 33
What is the Sync network on Appliances used for?
- A. To transfer data in case of full utilization of the downlink interfaces
- B. May be used for any purpose, but synchronization always have priority
- C. To synchronize configurations and connections in between connection tables of different Appliances
- D. To transfer configuration files from Orchestrators to Appliances
Answer: C
NEW QUESTION # 34
What kind of cluster Dual-Site can be compared to?
- A. VSLS only
- B. Active-Active
- C. Active-Standby or VSLS
- D. Active-Standby only
Answer: C
Explanation:
A Dual-Site cluster is a type of cluster that combines the features of both Active-Standby and VSLS (Virtual Systems Load Sharing) clusters. Dual-Site clusters allow you to have two active clusters, one at each site, and the traffic is distributed between the two sites based on predefined rules and priorities.
A Dual-Site cluster can be compared to an Active-Standby cluster because one of the clusters is running in a passive mode and is only activated in case of a failure or a planned maintenance of the active cluster. And also can be compared to a VSLS cluster because both clusters are active and share the traffic load.
It's a type of High Availability solution that provides redundancy and failover capabilities across two geographically separated sites. In case of a failure or a outage on one site, the traffic is automatically redirected to the other site, ensuring that the service is not interrupted.
NEW QUESTION # 35
......
Pass CheckPoint 156-835 Exam Quickly With TestPDF: https://pass4sure.testpdf.com/156-835-practice-test.html
