2022 1z0-1045-22 Dumps PDF - 1z0-1045-22 Real Exam Questions Answers
Valid 1z0-1045-22 Test Answers & Oracle 1z0-1045-22 Exam PDF
NEW QUESTION 36
When creating an Appointment, which three "Matching value type" selections can be used to create the Appointment? (Choose three.)
- A. PO Number
- B. Advance Shipment Notification
- C. License Plane Nbr
- D. Load Nbr
- E. Dock Door
- F. Trailer Nbr
Answer: A,D,E
NEW QUESTION 37
Your client wants to do flow-through allocations. Which two types of packing transactions achieve this flow? (Choose two.)
- A. Packlpn
- B. Pick Cart
- C. Distribution
- D. PackNC
Answer: C,D
NEW QUESTION 38
What is true about emailing a scheduled report?
- A. You can add an additional filter for a specific scheduled report
- B. The person receiving the email must have an email registered with a username in the system
- C. You can email reports in HTML format
- D. You cannot customize the subject of the email
Answer: A
NEW QUESTION 39
What configuration is needed to create Advance Shipment Notifications for a Transfer Order shipped between two facilities configured in the same WMS Cloud environment?
- A. Set CREATE_ASN_FOR_EACH_PO to YES at Source and Destination Facility levels.
- B. The Facility parameter key AUTOLOAD_and_SHIP should be set to Yes.
- C. The "ACCEPT TRANSFER SHIPMENT" flag should be enabled on the Facilities UI screen for the Source Facility.
- D. The "ACCEPT TRANSFER SHIPMENT" flag should be enabled on the Facilities UI screen for the Destination Facility.
- E. Set CREATE_ASN_FOR_EACH_PO to YES at the Company level.
Answer: D
NEW QUESTION 40
You want to wave three orders. Two orders had the same route number in the order header, and the other order didn't have a route number. You want to make sure the orders are assigned to the same load.
What should you do or check?
- A. If they all have the same "Ship to Name" and "Ship to Address 1", they will be assigned to the same load.
- B. Change company parameter WAVE_ASSIGN_LOAD to One load per wave
- C. Add another route number to the third order. As long as they are waved together, they will be assigned to the same load.
- D. Change the Task selection criteria to be configured to assign by load.
Answer: A
NEW QUESTION 41
Which five combinations of lot and expiry date are valid scenarios in WMS Cloud? (Choose five.)
- A. Two IB LPNs of the same item have different lots and the same expiry dates.
- B. The IB LPNs have an item with the same lot and different expiry dates.
- C. An item is lot-tracked but not expiry-date-tracked.
- D. Two IB LPNs of the same item have the same lot and the same expiry date.
- E. Two IB LPNs of the same item have different lots and different expiry dates.
- F. An item is expiry-date-tracked but not lot-tracked.
Answer: B,C,D,E,F
NEW QUESTION 42
Both Item A and item B are batch-tracked items. Your customer has been using both the IBLPNs UI screen and the Batch Management UI screen to manage batch-tracked inventory.
Your customer only has reserve locations for storage and doesn't use systematic ASN verification process in WMS Cloud. There are two records in the Batch Management UI screen of tem A and item B respectively, and these two records have the same value in the Batch Number field.
In the Batch Management UI screen, when you select the record of item A and apply a lock code, which two statements are true? (Choose two.)
- A. Inventory History record 22 - Lock Container - Before ASN Verification will be generated
- B. Inventory History record 23 - Lock Container - After ASN Verification will be generated
- C. This lock code will appear in the Number Locks hyperlink in the IBLPNs UI scree for all the IBLPNs of item A with this batch number.
- D. This lock code will appear in the Batch Nbr Lock field in the IBLPNs UI screen for all the IBLPNs of item a with this batch number.
- E. This lock code will be applied to the record of item B automatically in the Batch Management UI screen.
Answer: B,D
NEW QUESTION 43
Your customer wants to Putaway LPN to Location by using the Putaway Rules and link the location with the Replenishment Zone.
Which four configurations are required? (Choose four.)
- A. Set Replenishment Zone for Reserve Location.
- B. Putaway Type is set at Facility Level.
- C. Set Replenishment Zone for Active Location.
- D. Set Criteria for Putaway Rules.
- E. Putaway Priority and Rules are set at Facility Level.
- F. Set the Location Size Type at Facility Level.
Answer: B,C,E,F
NEW QUESTION 44
Your client wants to create an Advanced Shipment Notification (ASN) automatically after a Purchase Order (PO) is created in the system.
What step should they perform?
- A. Update the Company Parameter CREATE_ASN_FOR_EACH_PO to Yes on the Company Parameter UI screen
- B. The user needs to go to the Purchase Order Screen UI and select the "Create IB Shipment" check box
- C. When interfacing the shipment, the PO number should be specified
- D. When interfacing the PO, the "create_asn" check box needs to be selected every time
Answer: A
NEW QUESTION 45
A user is using the PackNC transaction to pack into a blind OBLPN. The user needs to pick up 10 units for Item 000234, but after picking up four units the OBLPN is full.
What should the user do?
- A. scan the next order
- B. short the remaining units
- C. move to the next location
- D. end the LPN
Answer: D
NEW QUESTION 46
Which statement is true regarding Replenishment Rules?
- A. Replenishment Rules are used for defining Wave Template.
- B. Replenishment Rules are used for Inventory movement between two warehouses.
- C. Replenishment Rules are only editable at the company level in which it was created.
- D. Replenishment Rules created at Parent company view can be edited at Child company view.
Answer: A
NEW QUESTION 47
Your customer is a Third Party Logistics operator (3PL) and ships multiple customer's orders from two centralized facilities, one on each coast of the country.
How do you set up the Facility, Company, and User hierarchy in the system (in sequential order)?
- A. Create the Parent 3PL Company, then the Facilities, next the Companies, next re-create each User in each facility he or she is eligible for work.
- B. Create the Parent 3PL Company, then nested Locations Zones to represent the facilities and the customer Companies and finally add the Users.
- C. Because of the distance between Facilities, you recommend two WMS Cloud instances for your customer.
- D. Create the Parent Company as the 3PL, then the two facilities, next the Users in the facilities, and the Companies that represent the customers, and the users to the companies.
- E. Create the 3PL's customer's Companies first, then the Users, next assign customers and Users to the Facilities, and finally create an Admin account for the 3PL in each facility.
Answer: D
NEW QUESTION 48
Select three statements are true. (Choose three.)
- A. Appointments cannot be used to track lead-time from the trailer's check-in time to the receipt of the first LPN into the system.
- B. The Duration as specified cannot be exceeded by the users.
- C. The matching value type and matching value must be specified when the appointment is created.
- D. Appointments are useful for tracking time discrepancies in various metrics such as planned and actual arrival time.
- E. Appointments can be used (instead of IB loads) as a way of checking in Loads into the WMS Cloud for receiving.
Answer: C,D,E
Explanation:
Reference:
context=0:44112:44122#h2_004
NEW QUESTION 49
Which three interface validations cause the Advance Shipment Notifications (ASN) to fail when uploading to WMS Cloud? (Choose three.)
- A. ASN file has invalid data format.
- B. A Purchase Order that is referenced on the ASN doesn't exist in WMS Cloud.
- C. Purchase Detail line and ASN Detail line do not match in WMS Cloud.
- D. ASN Qty and Purchase Qty do not match in WMS Cloud.
- E. ASN data is past the shipping date.
Answer: A,B,C
NEW QUESTION 50
Identify three valid statements related to IB Sorting. (Choose three.)
- A. IB Sorting is done before Putaway
- B. IB Sorting can be done by Manual and System driven method
- C. IB Sorting will group SKUs with different Putaway type and build in a single pallet
- D. IB Sorting is done based on Putaway Priority.
- E. IB Sorting is done after Putaway
Answer: B,C,D
NEW QUESTION 51
As an Inventory Super User, you are configuring LPNs per tier and Tiers per Pallet fields at Item Details screen.
Which statement is true about LPNs per tier and Tiers per Pallet?
- A. LPNs per tier and Tiers per Pallet are used to define number of Ob LPN per tier during shipping.
- B. LPNs per tier and Tier per Pallet are used to define the standard number of LPNs acceptable per pallet during receiving.
- C. LPNs per tier and Tiers per Pallet are used to define number of IB LPN per tier during receiving.
- D. LPNs per tier and Tiers per pallet are used to define the standard number of case and pack for an Item during receiving.
Answer: D
NEW QUESTION 52
Your company wants to use Replenishment Wave to maintain adequate inventory levels to meet customer demand by fulfilling customer's orders on time.
Which Replenishment Trigger Mode needs to be set up in the Replenishment Template for the following condition?
For active Location P20A100
Minimum Volume = 20
Max Volume = 100
Percentage of Max = 20%
Length = 20, Width = 40, Height = 60
If location P20A100 total volume goes below 20, the location is triggered for replenishment
- A. Minimum Capacity
- B. Order Based
- C. Percentage of Max
- D. Reactive
Answer: C
NEW QUESTION 53
A Purchase order created in ERP is downloaded to WMS Cloud.
Which two statements are correct related to the Purchase order update? (Choose two.)
- A. UPDATE is sent in the Header and CREATE in the Detail for an existing Purchase Order line. The application will add up the corresponding "Order Quantity".
- B. Purchase order can be re-created by sending the RE-CREATE action code when the status is In- Receiving.
- C. UPDATE is sent both in the Header and Detail for an existing line. The application will just update the record at Details.
- D. The Purchase order header can be updated by sending an UPDATE action code when the status is in Created and Received.
- E. The RE-CREATE action code if sent for an existing PO, the same PO will be deleted and re-created with the new details.
Answer: C,D
NEW QUESTION 54
Identify the export type that is not supported in an Express Report.
- A. PDF
- B. CSV
- C. Excel
- D. RTF
- E. PowerPoint
Answer: E
NEW QUESTION 55
Which two REST API actions are supported by Oracle WMS Cloud? (Choose two.)
- A. SEND
- B. DELETE
- C. POST
- D. RECEIVE
- E. GET
Answer: C,E
NEW QUESTION 56
Select four true statements about System Directed QC. (Choose four.)
- A. Items are flagged based on the vendor that sent PO and ASN.
- B. The QC process required the use of Purchase Order.
- C. For QC to happen, the vendor has to be configured in the system.
- D. How many SKUs are flagged for QC depends on what is specified in the vendor QC Screen.
- E. Once system directed QC is turned on, all receipts go through QC.
Answer: B,C,D,E
NEW QUESTION 57
You are monitoring the progress of the picking wave and notice that a rush order needs to be picked immediately.
Which two steps should you take to complete the Picking Tasks as soon as possible? (Choose two.)
- A. Manually take the inventory from the location to the shipping area.
- B. Select the tasks and in the Tasks UI, select Change Task Priority to give the task a higher priority.
- C. Select the tasks in the Tasks UI, select Cancel Task, and re-run the wave.
- D. Select the tasks in the Tasks UI, select Assign user, and let the picker know that he/she is to select the
- E. Select the tasks in the Tasks UI, and confirm the pick in the UI.
Answer: D,E
Explanation:
tasks for immediate pick.
NEW QUESTION 58
Which three interface validations cause the Advance Shipment Notifications (ASN) to fail when uploading to WMS Cloud? (Choose three.)
- A. ASN file has invalid data format.
- B. Purchase Detail line and ASN Detail line do not match in WMS Cloud.
- C. A Purchase Order that is referenced on the ASN doesn't exist in WMS Cloud.
- D. ASN Qty and Purchase Qty do not match in WMS Cloud.
- E. ASN data is past the shipping date.
Answer: A,B,D
NEW QUESTION 59
Your company's count process has two levels:
First, at the end of each quarter, the operators will need to get a list of all the LPN numbers in every location via cycle count.
Second, at the end of each month, the operators will do a spot check for any 100 LPNs and count their content information, and to save time, they will scan each item only once and enter the total quantity of the item marked on the inner package inside an LPN.
Your company has reserve locations only for storage and you're doing the WMS Cloud configuration for the operators. Which two tasks should you complete? (Choose two.)
- A. Create a Cycle count for LPN deferred/immediate updates RF screen for the operators to use, and set the sku-scan-mode RF parameter to By Qty Scan.
- B. Create a Cycle Cnt RF screen for the operators to use, and set the content-count RF parameter to By Sku Qty.
- C. Enable the Recount Location Detail cc_trigger.
- D. Create a Resv Nbr Cnt RF screen for the operators to use.
- E. Create a Cycle Cnt RF screen for the operators to use, and leave the content-count RF parameter blank.
Answer: A,D
NEW QUESTION 60
......
Oracle 1z0-1045-22 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
1z0-1045-22 Exam Dumps - PDF Questions and Testing Engine: https://pass4sure.testpdf.com/1z0-1045-22-practice-test.html
