Free Dec-2025 UPDATED Fortinet NSE7_LED-7.0 Certification Exam Dumps is Online [Q33-Q56]

Free Dec-2025 UPDATED Fortinet NSE7_LED-7.0 Certification Exam Dumps is Online

Fortinet Exam 2025 NSE7_LED-7.0 Dumps Updated Questions

Fortinet NSE7_LED-7.0 exam is a valuable certification for network security professionals who want to demonstrate their expertise in deploying and managing Fortinet's LAN Edge solutions. Fortinet NSE 7 - LAN Edge 7.0 certification is recognized globally and is highly regarded by employers in the IT industry. Fortinet NSE 7 - LAN Edge 7.0 certification validates the candidate's knowledge and skills in securing LAN infrastructure, configuring Secure SD-WAN, and managing Fortinet's LAN Edge solutions. Candidates who pass the Fortinet NSE7_LED-7.0 exam will receive the Fortinet NSE 7 certification, which is a testament to their expertise and proficiency in network security.

Fortinet NSE7_LED-7.0 exam is an advanced-level certification that tests your expertise in designing, implementing, and managing LAN edge security solutions using Fortinet products. Fortinet NSE 7 - LAN Edge 7.0 certification is critical for network security professionals who want to validate their skills in LAN edge security and stay ahead of the competition in the industry. To pass NSE7_LED-7.0 exam, you need to have a comprehensive study plan and access to reliable study materials.

Fortinet NSE7_LED-7.0 exam comes with a series of objectives that are broken down into 8 different domains, which include design concepts and considerations, Fortinet’s Secure SD-WAN, Fortinet’s cloud-based SD-WAN, Fortinet’s FortiManager and FortiAnalyzer, Fortinet’s Secure SD-Branch, Fortinet’s firewall technology, Fortinet’s IPS technology, and various troubleshooting methodologies.

NEW QUESTION # 33
Which two statements about FortiSwitch trunks are true? (Choose two.)

A. By default, when connecting two FortiSwitch devices to each other, a trunk is automatically created between the switches.
B. LACP is not supported.
C. A trunk is a link aggregation group interface.
D. Trunks do not support tagged Ethernet frames.

Answer: A,C

NEW QUESTION # 34
Which two statements about FortiSwitchmanager are true1? (Choose two)

A. Any switch discovered or authorized on FortiGate must be added manually on FortiSwitch manager
B. FortiManager obtains the FortiSwitch status information by querying the FortiGate REST API every three minutes
C. Per-device management is the default management mode on FortiManager
D. If the administrator makes any changes on FortiSwitch manager they must also install those changes on FortiGate so that those changes are applied on the managed switches

Answer: B,D

Explanation:
Explanation
According to the FortiManager Administration Guide1, "FortiManager obtains the FortiSwitch status information by querying the FortiGate REST API every three minutes." Therefore, option B is true because it describes how FortiManager gets the information about the managed switches. According to the same guide2,
"If you make any changes in this module, you must install them on your managed device so that they are applied on your managed switches." Therefore, option C is true because it describes what the administrator must do after making any changes on FortiSwitch manager. Option A is false because central management is the default management mode on FortiManager, not per-device management. Option D is false because anyswitch discovered or authorized on FortiGate will be automatically added on FortiSwitch manager, not manually.
1: https://docs.fortinet.com/document/fortimanager/7.0.0/administration-guide/734537/fortiswitch-manager 2:
https://docs.fortinet.com/document/fortimanager/7.0.0/administration-guide/734537/fortiswitch-manager#fortisw

NEW QUESTION # 35
Refer to the exhibit.

Examine the network diagram and packet capture shown in the exhibit
The packet capture was taken between FortiGate and FortiAuthenticator and shows a RADIUS Access-Request packet sent by FortiSwitch to FortiAuthenticator through FortiGate Why does the User-Name attribute in the RADIUS Access-Request packet contain the client MAC address?

A. The client is performing user authentication
B. FortiSwitch is sending a RADIUS accounting message to FortiAuthenticator
C. FortiSwitch is authenticating the client using MAC authentication bypass
D. The client is performing AD machine authentication

Answer: C

Explanation:
Explanation
According to the exhibit, the User-Name attribute in the RADIUS Access-Request packet contains the client MAC address of 00:0c:29:6a:2b:3d. This indicates that FortiSwitch is authenticating the client using MAC authentication bypass (MAB), which is a method of authenticating devices that do not support 802.1X by using their MAC address as the username and password. Therefore, option B is true because it explains why the User-Name attribute contains the client MAC address. Option A is false because AD machine authentication uses a computer account name and password, not a MAC address. Option C is false because user authentication uses a user name and password, not a MAC address. Option D is false because FortiSwitch is sending a RADIUS Access-Request message to FortiAuthenticator, not a RADIUS accounting message.

NEW QUESTION # 36
What is the purpose of enabling Windows Active Directory Domain Authentication on FortiAuthenticator?

A. It enables FortiAuthenticator to import users from Windows AD
B. It enables FortiAuthenticator to register itself as a Windows trusted device to proxy authentication using Kerberos
C. It enables FortiAuthenticator to use Windows administrator credentials to perform an LDAP lookup for a user search
D. It enables FortiAuthenticator to use a Windows CA certificate when authenticating RADIUS users

Answer: B

Explanation:
Windows Active Directory domain authentication enables FortiAuthenticator to join a Windows Active Directory domain as a machine entity and proxy authentication requests using Kerberos.

NEW QUESTION # 37
Refer to the exhibit.

Examine the FortiManager information shown in the exhibit
Which two statements about the FortiManager status are true'' (Choose two)

A. FortiSwitch manager is working in central management mode
B. FortiSwitch is authorized and offline
C. FortiSwitch is not authorized
D. FortiSwitch manager is working in per-device management mode

Answer: A,B

Explanation:
Explanation
According to the FortiManager Administration Guide, "Central management mode allows you to manage all FortiSwitch devices from a single interface on the FortiManager device." Therefore, option C is true because the exhibit shows that the FortiSwitch manager is enabled and the FortiSwitch device is managed by the FortiManager device. Option D is also true because the exhibit shows that the FortiSwitch device status is offline, which means that it is not reachable by the FortiManager device, but it is authorized, which means that it has been added to the FortiManager device. Option A is false because per-device management mode allows you to manage each FortiSwitch device individually from its own web-based manager or CLI, which is not the case in the exhibit. Option B is false because the FortiSwitch device is authorized, as explained above.

NEW QUESTION # 38
An administrator is deploying AP's that are connecting over an IPsec network. All APs have been configured to connect to FortiGate manually. FortiGate can discover the APs and authorize them. However, FortiGate is unable to establish CAPWAP tunnels to manage the APs.
Which configuration setting can the administrator perform to resolve the problem?

A. Upgrade the FortiAP firmware image to ensure compatibility with the FortiOS version.
B. Decrease the CAPWAP tunnel MTU size for APs to prevent fragmentation.
C. Assign a custom AP profile for the remote APs with the set mpls-connection option enabled.
D. Enable CAPWAP administrative access on the IPsec interface.

Answer: B

NEW QUESTION # 39
When you configure a FortiAP wireless interface for auto TX power control which statement describes how it configures its transmission power"?

A. Every 30 seconds FortiGate measures the signal strength of adjacent AP interfaces It will adjust its own AP power to match the adjacent AP signal strength
B. Every 30 seconds FortiGate measures the signal strength of adjacent FortiAP interfaces It will adjust the adjacent AP power to be detectable at -70 dBm
C. Every 30 seconds FortiGate measures the signal strength of the weakest associated client The AP will then configure its radio power to match the detected signal strength of the client
D. Every 30 seconds the AP will measure the signal strength of the AP using the client The AP will adjust its signal strength up or down until the AP signal is detected at -70 dBm

Answer: D

Explanation:
Explanation
According to the FortiAP Configuration Guide1, "Auto TX power control allows the AP to adjust its transmit power based on the signal strength of the client. The AP will measure the signal strength of the client every 30 seconds and adjust its transmit power up or down until the client signal is detected at -70 dBm." Therefore, option A is true because it describes how the FortiAP wireless interface configures its transmission power when auto TX power control is enabled. Option B is false because FortiGate does not measure the signal strength of adjacent AP interfaces, but rather the FortiAP does. Option C is false because FortiGate does not adjust the adjacent AP power, but rather the FortiAP adjusts its own power. Option D is false becauseFortiGate does not measure the signal strength of the weakest associated client, but rather the FortiAP does.

NEW QUESTION # 40
Which CLI command should an administrator use to view the certificate verification process in real time?

A. diagnose debug application radiusd -1
B. diagnose debug application authd -1
C. diagnose debug application foauthd -1
D. diagnose debug application fnbamd -1

Answer: C

Explanation:
Explanation
According to the FortiOS CLI Reference Guide, "The diagnose debug application foauthd command enables debugging of certificate verification process in real time." Therefore, option A is true because it describes the CLI command that an administrator should use to view the certificate verification process in real time. Option B is false because diagnose debug application radiusd -1 enables debugging of RADIUS authentication process, not certificate verification process. Option C is false because diagnose debug application authd -1 enables debugging of authentication daemon process, not certificate verification process. Option D is false because diagnose debug application fnbamd -1 enables debugging of FSSO daemon process, not certificate verification process.

NEW QUESTION # 41
Refer to the exhibit. Examine the IPsec VPN phase 1 configuration shown in the exhibit. An administrator wants to use certificate-based authentication for an IPsec VPN user.
Which three configuration changes must you make on FortiGate to perform certificate-based authentication for the IPsec VPN user? (Choose three)

A. Import the CA that signed the user certificate
B. In the IKE section of the IPsec VPN tunnel in the Mode field select Main (ID protection)
C. Create a PKI user for the IPsec VPN user, and then configure the IPsec VPN tunnel to accept the PKI user as peer certificate
D. Enable XAUTH on the IPsec VPN tunnel
E. In the Authentication section of the IPsec VPN tunnel in the Method drop-down list select Signature and then select the certificate that FortiGate will use for IPsec VPN

Answer: A,C,E

NEW QUESTION # 42
Exhibit.

Exhibit.

Refer to the exhibits
In the wireless configuration shown in the exhibits, an AP is deployed in a remote site and has a wireless network (VAP) called Corporate deployed to it The network is a tunneled network however clients connecting to a wireless network require access to a local printer Clients are trying to print to a printer on the remote site but are unable to do so Which configuration change is required to allow clients connected to the Corporate SSID to print locally?

A. Disable the Block Intra-SSID Traffic (intra-vap-privacy) setting on the SSID (VAP) profile
B. Configure split-tunneling in the wtp-profile configuration
C. Configure the printer as a wireless client on the Corporate wireless network
D. Configure split-tunneling in the vap configuration

Answer: D

Explanation:
Explanation
According to the Fortinet documentation1, "Split tunneling allows you to specify which traffic is tunneled to the FortiGate and which traffic is sent directly to the Internet. This can improve performance and reduce bandwidth usage." Therefore, by configuring split-tunneling in the vap configuration, you can allow the clients connected to the Corporate SSID to access both the corporate network and the local printer. Option B is incorrect because split-tunneling is configured at the vap level, not the wtp-profile level. Option C is incorrect because blocking intra-SSID traffic prevents wireless clients on the same SSID from communicating with each other, which is not related to accessing a local printer. Option D is unnecessary and impractical because the printer does not need to be a wireless client on the Corporate wireless network to be accessible by the clients.

NEW QUESTION # 43
To troubleshoot configuration push issues on a managed FortiSwitch, which FortiGate process should an administrator enable debug for?

A. httpsd
B. cu_acd
C. flcfgd
D. fortilinkd

Answer: C

NEW QUESTION # 44
An administrator has configured an SSID in bridge mode for corporate employees. All APs are online and provisioned using default AP profiles. Employees are unable to locate the SSID to connect.
Which two configurations can the administrator verify? (Choose two.)

A. Verify that the SSID is manually applied on AP profiles for both 2.4 GHz and 5 GHz radios
B. Verify that the SSID to an AP group that should be broadcasting the SSID is applied
C. Verify that the broadcast SSID option is enabled in the SSID configuration
D. Verify that the Block Intra-SSID Traffic (intra-vap-privacy) option in the SSID configuration is disabled

Answer: A,C

Explanation:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-enable-and-disable-broadcast- of-SSID/ta-p/191840

NEW QUESTION # 45
You are configuring a FortiGate wireless network to support automated wireless client quarantine using IOC Which two configurations must you put in place for a wireless client to be quarantined successfully? (Choose two)

A. Configure the wireless network to be in bridge mode
B. Configure a firewall policy to allow communication
C. Configure the wireless network to be in tunnel mode
D. Configure the FortiGate device in the Security Fabric with a FortiAnalyzer device

Answer: C,D

Explanation:
Explanation
According to the FortiGate Administration Guide, "To enable automated wireless client quarantine using IOC, you must configure the following settings: Configure your wireless network to be in tunnel mode. This allows FortiGate to inspect all wireless traffic and applysecurity policies. Configure your FortiGate device in the Security Fabric with a FortiAnalyzer device. This allows FortiAnalyzer to detect indicators of compromise (IOC) from wireless traffic and send quarantine commands to FortiGate." Therefore, options A and B are true because they describe the configurations that must be put in place for a wireless client to be quarantined successfully using IOC. Option C is false because configuring a firewall policy to allow communication is not required, as the default firewall policy for tunnel mode wireless networks is to allow all traffic. Option D is false because configuring the wireless network to be in bridge mode is not supported, as FortiGate cannot inspect or quarantine wireless traffic in bridge mode.

NEW QUESTION # 46
Refer to the exhibit. Examine the FortiGate configuration, FortiAnalyzer logs, and FortiGate widget shown in the exhibit.
An administrator is testing the Security Fabric quarantine automation. The administrator added FortiAnalyzer to the Security Fabric, and configured an automation stitch to automatically quarantine compromised devices. The test device (10.0.2.1) is connected to a managed FortiSwitch device.
After trying to access a malicious website from the test device, the administrator verifies that FortiAnalyzer has a log for the test connection. However, the device is not getting quarantined by FortiGate, as shown in the quarantine widget.
Which two scenarios are likely to cause this issue? (Choose two.)

A. The device does not have FortiClient installed
B. FortiAnalyzer does not consider the malicious website an indicator of compromise (IOC)
C. The web filtering rating service is not working
D. FortiAnalyzer does not have a valid threat detection services license

Answer: B,D

NEW QUESTION # 47
Which statement correctly describes the guest portal behavior on FortiAuthenticator?

A. FortiAuthenticator uses POST parameters and a RADIUS client configuration to map the request to a guest portal for authentication.
B. All guest accounts must be activated using SMS or email activation codes.
C. All self-registered and sponsored accounts are listed on the local Users GUI page on FortiAuthenticator.
D. Sponsored accounts cannot authenticate using guest portals.

Answer: A

NEW QUESTION # 48
An administrator is testing the connectivity for a new VLAN. The devices in the VLAN are connected to a FortiSwitch device that is managed by FortiGate. Quarantine is disabled on FortiGate.
While testing, the administrator noticed that devices can ping FortiGate and FortiGate can ping the devices. The administrator also noticed that inter-VLAN communication works. However, intra-VLAN communication does not work.
Which scenario is likely to cause this issue?

A. The FortiSwitch MAC address table is missing entries
B. The FortiGate ARP table is missing entries
C. The native VLAN configured on the ports is incorrect
D. Access VLAN is enabled on the VLAN

Answer: D

NEW QUESTION # 49
Which CLI command should an administrator use to view the certificate verification process in real time?

A. diagnose debug application radiusd -1
B. diagnose debug application authd -1
C. diagnose debug application foauthd -1
D. diagnose debug application fnbamd -1

Answer: C

NEW QUESTION # 50
Which FortiSwitch VLANs are automatically created on FortGate when the first FortiSwitch device is discovered1?

A. default quarantine, rspan voice video onboarding and nac_segment
B. default quarantine rspan voice video and nac_segment
C. fortilink. quarantine erspan voice video and onboarding
D. access, quarantine, rspan. voice, video, and onboarding

Answer: C

Explanation:
Explanation
According to the FortiGate Administration Guide, "When you add a FortiSwitch device to the Security Fabric, FortiGate automatically creates the following VLANs on theFortiSwitch device: fortilink, quarantine, erspan, voice, video, and onboarding." Therefore, option D is true because it lists the FortiSwitch VLANs that are automatically created on FortiGate when the first FortiSwitch device is discovered. Option A is false because default and nac_segment are not among the automatically created VLANs. Option B is false because access and rspan are not among the automatically created VLANs. Option C is false because default and nac_segment are not among the automatically created VLANs.

NEW QUESTION # 51
Where can FortiGate learn the FortiManager IP address or FQDN for zero-touch provisioning'?

A. From a DHCP server using options 240 and 241
B. From an LDAP server using a simple bind operation
C. From a TFTP server
D. From a DNS server using A or AAAA records

Answer: A

Explanation:
FG retrieves the FortiManager IP address or FQDN through DHCP options 240 or 241 respectively.

NEW QUESTION # 52
Refer to the exhibit.

Examine the FortiGate configuration FortiAnalyzer logs and FortiGate widget shown in the exhibit An administrator is testing the Security Fabric quarantine automation The administrator added FortiAnalyzer to the Security Fabric and configured an automation stitch to automatically quarantine compromised devices The test device (::.:.:.!) s connected to a managed Fort Switch dev :e After trying to access a malicious website from the test device, the administrator verifies that FortiAnalyzer has a log (or the test connection However the device is not getting quarantined by FortiGate as shown in the quarantine widget Which two scenarios are likely to cause this issue? (Choose two)

A. The device does not have FortiClient installed
B. FortiAnalyzer does not consider the malicious website an indicator of compromise (IOC)
C. The web filtering rating service is not working
D. FortiAnalyzer does not have a valid threat detection services license

Answer: B,D

Explanation:
According to the exhibits, the administrator has configured an automation stitch to automatically quarantine compromised devices based on FortiAnalyzer's threat detection services. However, according to the FortiAnalyzer logs, the test device is not detected as compromised by FortiAnalyzer, even though it tried to access a malicious website. Therefore, option B is true because FortiAnalyzer does not have a valid threat detection services license, which is required to enable the threat detection services feature. Option D is also true because FortiAnalyzer does not consider the malicious website an indicator of compromise (IOC), which is a criterion for identifying compromised devices. Option A is false because the web filtering rating service is working, as shown by the log entry that indicates that the test device accessed a URL with a category of
"Malicious Websites". Option C is false because the device does not need to have FortiClient installed to be quarantined by FortiGate, as long as it is connected to a managed FortiSwitch device.

NEW QUESTION # 53
When you configure a FortiAP wireless interface for auto TX power control which statement describes how it configures its transmission power"?

A. Every 30 seconds the AP will measure the signal strength of the AP using the client The AP will adjust its signal strength up or down until the AP signal is detected at -70 dBm
B. Every 30 seconds FortiGate measures the signal strength of adjacent AP interfaces It will adjust its own AP power to match the adjacent AP signal strength
C. Every 30 seconds FortiGate measures the signal strength of adjacent FortiAP interfaces It will adjust the adjacent AP power to be detectable at -70 dBm
D. Every 30 seconds FortiGate measures the signal strength of the weakest associated client The AP will then configure its radio power to match the detected signal strength of the client

Answer: C

NEW QUESTION # 54
Refer to the exhibits.

Firewall Policy

Examine the firewall policy configuration and SSID settings
An administrator has configured a guest wireless network on FortiGate using the external captive portal The administrator has verified that the external captive portal URL is correct However wireless users are not able to see the captive portal login page Given the configuration shown in the exhibit and the SSID settings which configuration change should the administrator make to fix the problem?

A. Include the wireless client subnet range in the Exempt Source section
B. Disable the user group from the SSID configuration
C. Enable the captivs-portal-exempt option in the firewall policy with the ID 11.
D. Apply a guest.portal user group in the firewall policy with the ID 11.

Answer: D

Explanation:
Explanation
According to the FortiGate Administration Guide, "To use an external captive portal, you must configure a user group that uses the external captive portal as the authentication method and apply it to a firewall policy." Therefore, option C is true because it will allow the wireless users to be redirected to the external captive portal URL when they try to access the Internet. Option A is false because disabling the user group from the SSID configuration will prevent the wireless users from being authenticated by the FortiGate device. Option B is false because enabling the captive-portal-exempt option in the firewall policy will bypass the captive portal authentication for the wireless users, which is not the desired outcome. Option D is false because including the wireless client subnet range in the Exempt Source section will also bypass the captive portal authentication for the wireless users, which is not the desired outcome.

NEW QUESTION # 55
An administrator has configured an SSID in bridge mode for corporate employees All APs are online and provisioned using default AP profiles Employees are unable to locate the SSID to conned Which two configurations can the administrator verify? (Choose two)

A. Verify that the SSID is manually applied on AP profiles for both 2 4 GHz and 5 GHz radios
B. Verify that the SSID to an AP group that should be broadcasting the SSID is applied
C. Verify that the broadcast SSID option is enabled in the SSID configuration
D. Verify that the Block Intra-SSID Traffic (intra-vap-privacy) option in the SSID configuration is disabled

Answer: B,C

Explanation:
Explanation
According to the FortiAP Configuration Guide1, "To enable the SSID, you must select at least one channel for the radio. If no channels are selected, the SSID will not be enabled. You must also enable Broadcast SSID." Therefore, option A is true because the broadcast SSID option allows the SSID to be visible to wireless clients.
Option C is also true because the SSID must be applied to an AP group that contains the APs that should be broadcasting the SSID. According to the same guide1, "You can create AP groups and assign them to different locations or departments. You can then apply different settings, such as SSIDs, to each group." Option B is false because blocking intra-SSID traffic prevents wireless clients on the same SSID from communicating with each other, which is not related to broadcasting the SSID. Option D is false because the SSID can be applied to an AP group or a global profile, which will automatically apply to all APs, without manually configuring each AP profile.

NEW QUESTION # 56
......

Fortinet Certified NSE7_LED-7.0 Dumps Questions Valid NSE7_LED-7.0 Materials: https://pass4sure.testpdf.com/NSE7_LED-7.0-practice-test.html

Free Dec-2025 UPDATED Fortinet NSE7_LED-7.0 Certification Exam Dumps is Online [Q33-Q56]

Related Articles

Useful Links

Latest Test PDF Dumps

Contact Us