Free download pdf demo

Before you buy some things, the reference demo is necessary. So it is naturally that you need some demo for our Cisco 642-832 pass4sure dumps. Fortunately, we offer the 642-832 pdf demo for you. Moreover, you can free download it and have a try. So before you choose our 642-832 study material, you can try our free demo firstly. While, you should know that the questions & answers are part from the complete exam dumps, so you can just take the CCNP 642-832 pdf demo as a reference. If you do not want to choose our dumps, it doesn't matter. I think our test answers from the 642-832 pdf demo may also help you. If you want to try other two type demo, we offer the screen shot for you, you can know the details. When you have a basic understanding of our 642-832 pdf training, then you can do your decision. If you still have some doubt, you can contact us by email or online customer service. Our customer service will be there and solve your problem.

Pass for sure with the high-quality exam dumps

We all want to pass the 642-832 certification at the first attempt. Because the exam fee is so expensive and the preparation of 642-832 test really need much time and energy investment. Now, I think the quality and high hit rate are so important when choosing the study material for 642-832 certification. 642-832 Troubleshooting and Maintaining Cisco IP Switched Networks (TSHOOT) pass4sure dumps are highly recommended by many IT candidates because it has helped them passed the actual test successfully. 642-832 pass4sure test answers are compiled and written by our professional experts who checked and confirm according to several standards, thus the questions of 642-832 exam pdf are relevant together with accurate answers, which can ensure you pass at first time. With our CCNP 642-832 study material, you do not review other study materials. You can just focus on the study about our 642-832 pass4sure dumps.100% pass is an easy thing for you.

Safety shopping experience- 642-832 pass4sure test answers

We always insist the aims that serve our customers and deliver customer-centric service. When you visit our website and purchase our 642-832 Troubleshooting and Maintaining Cisco IP Switched Networks (TSHOOT) latest test practice, your personal information is protected by us. We guarantee that we will never share your information to the third part without your permission. So, you can rest assured to buy our CCNP 642-832 pass4sure dumps and enjoy your shopping experience. Besides, if you do not find what your need, you can contact us and leave your email, then, if the exam dumps are updated, we will inform you.

Are you preparing for the 642-832 certification recently? When you threw yourself into learning and study about 642-832 actual test, you will find your passion of studying wear off and feel depressed. Yes, at first, when we know that the 642-832 certification will bring us benefits and happiness, we are so excited and full of enthusiasm. But do not worry, if you feel tired and think it is hard to conquer the difficulty, thus you may need some other learning material like 642-832 exam pdf. CCNP 642-832 latest test practice may give you some help and contribute to your success.

Instant Download: Our system will send you the TestPDF 642-832 braindumps file you purchase in mailbox in a minute after payment. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

Cisco Troubleshooting and Maintaining Cisco IP Switched Networks (TSHOOT) Sample Questions:

1. Topic 14, Ticket 12 : HSRP Issue
Topology Overview (Actual Troubleshooting lab design is for below network design)
Client Should have IP 10.2.1.3
EIGRP 100 is running between switch DSW1 & DSW2
OSPF (Process ID 1) is running between R1, R2, R3, R4
Network of OSPF is redistributed in EIGRP
BGP 65001 is configured on R1 with Webserver cloud AS 65002
HSRP is running between DSW1 & DSW2 Switches
The company has created the test bed shown in the layer 2 and layer 3 topology exhibits.
This network consists of four routers, two layer 3 switches and two layer 2 switches.
In the IPv4 layer 3 topology, R1, R2, R3, and R4 are running OSPF with an OSPF process number 1.
DSW1, DSW2 and R4 are running EIGRP with an AS of 10. Redistribution is enabled where necessary.
R1 is running a BGP AS with a number of 65001. This AS has an eBGP connection to AS 65002 in the
ISP's network. Because the company's address space is in the private range.
R1 is also providing NAT translations between the inside (10.1.0.0/16 & 10.2.0.0/16) networks and outside
(209.65.0.0/24) network.
ASW1 and ASW2 are layer 2 switches.
NTP is enabled on all devices with 209.65.200.226 serving as the master clock source.
The client workstations receive their IP address and default gateway via R4's DHCP server.
The default gateway address of 10.2.1.254 is the IP address of HSRP group 10 which is running on DSW1
and DSW2.
In the IPv6 layer 3 topology R1, R2, and R3 are running OSPFv3 with an OSPF process number 6.
DSW1, DSW2 and R4 are running RIPng process name RIP_ZONE.
The two IPv6 routing domains, OSPF 6 and RIPng are connected via GRE tunnel running over the
underlying IPv4 OSPF domain. Redistrution is enabled where necessary.
Recently the implementation group has been using the test bed to do a `proof-of-concept' on several
implementations. This involved changing the configuration on one or more of the devices. You will be
presented with a series of trouble tickets related to issues introduced during these configurations.
Note: Although trouble tickets have many similar fault indications, each ticket has its own issue and
solution.
Each ticket has 3 sub questions that need to be answered & topology remains same.
Question-1 Fault is found on which device,
Question-2 Fault condition is related to,
Question-3 What exact problem is seen & what needs to be done for solution

2. DRAG DROP Match the items on the left to their purpose on the right

3. Topic 12, Ticket 10 : VLAN Access Map
Topology Overview (Actual Troubleshooting lab design is for below network design)
Client Should have IP 10.2.1.3
EIGRP 100 is running between switch DSW1 & DSW2
OSPF (Process ID 1) is running between R1, R2, R3, R4
Network of OSPF is redistributed in EIGRP
BGP 65001 is configured on R1 with Webserver cloud AS 65002
HSRP is running between DSW1 & DSW2 Switches
The company has created the test bed shown in the layer 2 and layer 3 topology exhibits.
This network consists of four routers, two layer 3 switches and two layer 2 switches.
In the IPv4 layer 3 topology, R1, R2, R3, and R4 are running OSPF with an OSPF process number 1.
DSW1, DSW2 and R4 are running EIGRP with an AS of 10. Redistribution is enabled where necessary.
R1 is running a BGP AS with a number of 65001. This AS has an eBGP connection to AS 65002 in the
ISP's network. Because the company's address space is in the private range.
R1 is also providing NAT translations between the inside (10.1.0.0/16 & 10.2.0.0/16) networks and outside
(209.65.0.0/24) network.
ASW1 and ASW2 are layer 2 switches.
NTP is enabled on all devices with 209.65.200.226 serving as the master clock source.
The client workstations receive their IP address and default gateway via R4's DHCP server.
The default gateway address of 10.2.1.254 is the IP address of HSRP group 10 which is running on DSW1
and DSW2.
In the IPv6 layer 3 topology R1, R2, and R3 are running OSPFv3 with an OSPF process number 6.
DSW1, DSW2 and R4 are running RIPng process name RIP_ZONE.
The two IPv6 routing domains, OSPF 6 and RIPng are connected via GRE tunnel running over the
underlying IPv4 OSPF domain. Redistrution is enabled where necessary.
Recently the implementation group has been using the test bed to do a `proof-of-concept' on several
implementations. This involved changing the configuration on one or more of the devices. You will be
presented with a series of trouble tickets related to issues introduced during these configurations.
Note: Although trouble tickets have many similar fault indications, each ticket has its own issue and
solution.
Each ticket has 3 sub questions that need to be answered & topology remains same.
Question-1 Fault is found on which device,
Question-2 Fault condition is related to,
Question-3 What exact problem is seen & what needs to be done for solution

Client 1 is unable to ping IP 209.65.200.241

4. The implementations group has been using the test bed to do a `proof-of-concept' that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing schemes, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address.
Use the supported commands to isolate the cause of this fault and answer the following question.
What is the solution to the fault condition?

A) Under the IP DHCP pool configuration, issue the no ip dhcp excluded-address 10.2.1.1 10.2.1.253 command and enter the ip dhcp excluded-address 10.2.1.1 10.2.1.2 command.
B) Under the IP DHCP pool configuration, delete the network 10.2.1.0 255.255.255.0 command and enter the network 10.1.4.0 255.255.255.0 command.
C) Under the IP DHCP pool configuration, delete the default -router 10.2.1.254 command and enter the default-router 10.1.4.5 command.
D) Under the global configuration, delete the no ip dhcp use vrf connected command.

5. The implementations group has been using the test bed to do a `proof-of-concept'. After several changes to the network addressing, routing schemes, a trouble ticket has been opened indicating that the loopback address on R1 (2026::111:1) is not able to ping the loopback address on DSW2(2026::102:1).
Use the supported commands to isolated the cause of this fault and answer the following questions.
What is the solution to fault condition?

A) Under the interface Serial0/0/0.12 configuration enter the ipv6 ospf 6 area 12 command.
B) Under ipv6 router ospf 6 configuration enter the network 2026::1:/122 area 0 command.
C) Under the interface Serial 0/0/0.23 configuration enter the ipv6 ospf 6 area 0 command.
D) Under ipv6 router ospf 6 configuration enter no passive-interface default command.

Solutions: